ica ° • ° nfo mat ®n
The technical specifications and international regulatory information for the HP All-in-One are
provided in this section.
System _eq_si_eme_,_ s
Software system requirements are located in the Readme file.
J
IP_oduct specifications
For product specifications, go to the HP Web site at www h/_ col /_;! /,hod.
Paper specifications
Main input tray capacity: Plain paper sheets: Up to 125 (20 Ib./75 gsm. paper)
Output tray capacity: Plain paper sheets: Up to 50 (20 Ib./75 gsm. paper)
Photo tray capacity: Photo paper sheets: Up to 20
NOTE: For a complete list of supported media sizes, see the printer software.
Physical specifications
Height: 21.6 cm (8.5 inches)
Width: 45.2 cm (17.8 inches)
Depth: 38.5 cm (15.2 inches)
Weight: 6.8 kg (!5 pounds)
Power specifications
Power consumption: 25 watts maximum (average printing)
Input voltage: AC 100 to 240 V _ 600 mA 50-60 Hz
Output voltage: DC 32 V===375 mA, 16 V===500 mA
_ NOTE: Use only with the power adapter supplied by HP.
Environmental specifications
Recommended operating temperature range: 15° to 32oC (59o to 90 ° F)
Allowable operating temperature range: 5° to 35 ° C (41 oto 95° F)
Humidity: 15% to 80% RH non-condensing
Non-operating (Storage) temperature range: -40 ° to 60 o C (-4 ° to 122 ° F)
In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One
may be slightly distorted
HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields
IE_,_e_gySta_@ notice
This product is designed to reduce power consumption and save natural resources without
compromising product performance. It has been designed to reduce total energy consumption both
during operation and when the device is not active. This product qualifies for ENERGY STAR® which
is a voluntary program established to encourage the development of energy-efficient office products.
m
i4or sato_ 25
To Next Page
Loading...