HP Pro 2000 User Manual

Hard Drives 160-GB 7200 rpm Serial ATA 3.0-Gb/s NCQ, SMART
250-GB 7200 rpm Serial ATA 3.0-Gb/s NCQ, SMART
320-GB 7200 rpm Serial ATA 3.0-Gb/s NCQ, SMART
500-GB 7200 rpm Serial ATA 3.0-Gb/s NCQ, SMART
System Memory 1-GB DDR3 Synch DRAM PC3-10600 (1066/1333-MHz) Non-ECC (1 x 1GB)
2-GB DDR3 Synch DRAM PC3-10600 (1066/1333-MHz) Non-ECC (2 x 1GB)
2-GB DDR3 Synch DRAM PC3-10600 (1066/1333-MHz) Non-ECC (1 x 2GB)
3-GB DDR3 Synch DRAM PC3-10600 (1066/1333-MHz) Non-ECC (1 x 1GB + 1 x 2GB)
4-GB DDR3 Synch DRAM PC3-10600 (1066/1333-MHz) Non-ECC (2 x 2GB)
NOTE: Memory runs at maximum system supported speed of 1066 MHz, or at 800 MHz when processor
has 800-MHz FSB. For systems configured with more than 3 GB of memory and a 32-bit operating system,
all memory may not be available due to system resource requirements. Addressing memory above 4 GB
requires a 64-bit operating system.
Storage –
One or more of the
following (see Storage
section below)
USB Pocket Media Drive (PMD) and Bay
HP 3.5-inch Pocket Media Drive Bay
HP 320GB 3.5-inch Pocket Media Drive with Bay
Diskette Drive
1.44 MB Diskette Drive
Media Reader
HP 22-in-1 Media Card Reader
Optical Drives (Serial ATA)
SATA DVD-ROM Drive
SATA SuperMulti LightScribe DVD Writer
HP SATA Blu-ray Writer
Input Devices Keyboard – One of the following
HP PS/2 Standard Keyboard
HP USB PS/2 Washable Keyboard
HP USB Standard Keyboard
HP USB Mini Keyboard
HP USB Smartcard Keyboard
Mouse – One of the following
PS/2 2-Button Optical Scroll Mouse
USB 2-Button Optical Scroll Mouse
USB 2-Button Laser Mouse
QuickSpecs
HP Pro 2000 Business PC
Standard Features and Configurable Components (availability may vary by country)
DA - 13494 Worldwide — Version 5 — November 29, 2010 Page 5

HP Pro 2000 Specifications

General

Form Factor	Microtower
Graphics	Integrated Intel HD Graphics
Optical Drive	DVD-Writer
Network	Integrated Gigabit Ethernet
Processor	Intel Core i3, i5, i7 (12th Gen)