Weight & Dimensions
Chassis Dimensions
(H x W x D)
15.14 x 7.27 x 16.36 in
385 x 185 x 416 mm
Packaged Dimensions
(D x L x W)
19.63 x 24.13 x 10.56 in
498.6 x 613 x 268.2 mm
System Weight
16.66 lb (7.56 kg)
Shipping Weight
24.63 lb (11.17 kg)
Technology and Features
Memory Type
PC3-10600 DDR3 SDRAM (1066/1333MHz) non-ECC
Up to 4 GB system memory standard
NOTE:
Memory runs at maximum system supported speed of 1066 MHz, or at 800 MHz when processor
has 800-MHz FSB. For systems configured with more than 3 GB of memory and a 32-bit operating system,
all memory may not be available due to system resource requirements. Addressing memory above 4 GB
requires a 64-bit operating system.
Hard Drive Interfaces
Supported
Serial ATA, NCQ support
Chassis
Front Panel
Power button
Power On LED
HDD Activity LED
Reset/recovery button (MT only)
*
Cooling Solutions
Supported
Power Supply Fan (variable speed)
Active heatsink (variable speed)
Chassis fan (variable speed)
Slots Supported
Four (4) full-height expansion slots
Front I/O
Two (2) USB 2.0 ports, Headphone, Mic
Rear I/O
Standard Micro ATX I/O connectors, including four(4) USB 2.0 ports, serial
ports
Drive Bays
Two (2) 5.25-inch (13.335 cm) half height external
One (1) 3.5-inch (8.89 cm) half height external
Two (2) 3.5-inch half height internal
Internal Speaker
Optional for APJ
Security
Padlock loop
Kensington Lock Support
Noble Universal Clamp Lock Cable Kit
Port Control Cover supported
Power Supply
250W PFC HV immunity (410V/s) with a 115v/230v line switch (varies by
country/region) as Standard configuration , and 300W PFC HV immunity
(410V/s) with a 115v/230v line switch and 300W 85% Efficiency power supply
as option
*Reset function will be set for China/Hong Kong/Korea; Recovery function will be set for all other regions.
QuickSpecs
HP Pro 2000 Business PC
System Details
DA - 13494 Worldwide — Version 5 — November 29, 2010
Page 8
To Next Page
Loading...
Need help?
General
