Setting up Novell SLED (HP Workstations only)
To set up the SUSE Linux Enterprise Desktop (SLED) on systems
preloaded with the operating system:
1. Boot the workstation.
2. Start the Installation Settings and enter the password, network,
graphics, time, keyboard settings, and Novell Customer Center
Configuration for the workstation.
NOTE: During Installation Settings after the first time after booting the
system the Novell subscription can be activated from the Novell Customer
Center Configuration screen. Visit the full Novell Customer Center
documentation at
http://www.novell.com/documentation/ncc/.
Protecting the Software
To protect the software from loss or damage, keep a backup copy of all
system software, applications, and related files stored on the hard drive.
Refer to the operating system or backup utility documentation for
instructions on making backup copies of your data files.
If you cannot create system recovery CDs or DVDs, you can order a
recovery disk set from the HP support center. To obtain the support center
telephone number for your region see
http://www.hp.com/ support/
contactHP.
Hewlett-Packard Vision Diagnostics (Windows systems)
NOTE: HP Vision Diagnostics is included on CD with some computer
models only.
The Hewlett-Packard Vision Diagnostics utility allows you to view
information about the hardware configuration of the computer and perform
hardware diagnostic tests on the subsystems of the computer. The utility
simplifies the process of effectively identifying, diagnosing, and isolating
hardware issues.
The Survey tab is displayed when you invoke HP Vision Diagnostics. This
tab shows the current configuration of the computer. From the Survey tab,
there is access to several categories of information about the computer.
Other tabs provide additional information, including diagnostic test options
and test results. The information in each screen of the utility can be saved
as an html file and stored on a diskette or USB flash drive.
ENWW
Setting up Novell SLED (HP Workstations only)
5
To Next Page
Loading...
