3. Remove the battery from the computer (3).
To insert the battery, reverse the removal procedures.
Speakers
To remove the speakers, use this procedure and illustration.
Table
5-3 Speaker description and part number
Description Spare part number
Speaker Kit M00436-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 25).
2. Remove the bottom cover (Bottom cover on page 25).
3. Remove the battery (see Battery on page 26).
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Disconnect the cable from the ZIF connector on the touchpad (2). You need to move this cable so you can
remove the speaker cable that routes under it.
28 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
