HP Pro c640 Chromebook - USB Board; USB Door

USB board
To remove the USB board, use this procedure and illustration.
Table 5-8 USB board description and part number
Description Spare part number
USB board M00433-001
USB board cables (included in Cable Kit) M00703-001
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 25).
2. Remove the bottom cover (Bottom cover on page 25).
3. Remove the battery (see Battery on page 26).
Remove the USB board:
1. Disconnect the two cables from the ZIF connectors on the USB board (1).
2. Remove the ve Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the USB board.
USB door
To remove the USB door, use this procedure and illustration.
Component replacement procedures 35