Installing a nano SIM card (select models only)
CAUTION: To prevent damage to a SIM card or a tablet, do not change the size of a SIM card by
cutting or sanding the card.
1. Insert a small straightened paper clip (1) into the card tray access hole.
2. Press in gently only until the card tray is ejected.
3. Remove the tray (2) from the tablet and insert the card (3).
4. Replace the tray (4) in the tablet.
5. Press in gently on the tray until it is firmly seated.
To set your mobile network, refer to the documentation from your mobile provider.
Using GPS (select models only)
Your tablet may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver
location, speed, and direction information to GPS-equipped systems.
For more information, see the HP GPS and Location software Help.
Connecting to a wireless network 9
To Next Page
Loading...
