Select To do this
Built-In Device Options ● Enable/disable the wireless button state (enabled by
default).
● Enable/disable the embedded WLAN device (enabled
by default).
● Enable/disable LAN/WLAN switching (disabled by
default).
● Enable/disable the Network Interface Controller (LAN)
(enabled by default).
● Set the wake on LAN state. Options include the
following:
◦ Disabled
◦
Boot to Network (set by default)
◦
Follow Boot Order
● Enable/disable the optical disc drive (enabled by
default).
● Enable/disable an audio device (enabled by default).
● Enable/disable a modem device (enabled by default).
●
Enable/disable the microphone (enabled by default).
Port Options (all are enabled by default) NOTE: All port options are enabled by default.
● Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the eSATA port.
78 Chapter 16 Computer Setup
To Next Page
Loading...
Need help?
General