Component replacement procedures
This chapter provides removal and replacement procedures.
Battery
Description Spare part number
6-cell, 51 WHr, 2.55 Ah Li-ion battery 669831-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
Remove the battery:
1. Position the computer upside-down on a flat surface.
2. Slide the battery release latches (1) to release the battery.
NOTE: You can slide the battery release latches simultaneously or one at a time.
3. Tilt the battery upward (2) to remove it from the battery bay (3).
Install the battery by inserting it into the battery bay until you hear a click.
40 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
