g. Speaker assembly (see Speaker assembly on page 91)
h. System board (see
System board on page 99)
NOTE: The latch mechanism includes a small spring. Note the location of the spring.
Remove the latch assembly:
1. Position the computer right-side up, with the front toward you.
2. Slide the latch toward the left (1).
3. Lift the latch from the tab that holds it in place (2).
4. Rotate the latch up and lift it out of the computer (3).
Reverse this procedure to install the latch assembly.
Component replacement procedures 111
To Next Page
Loading...
