Table 5-5 Solid-state drive descriptions and part numbers
Description Spare part number
Primary solid-state drives (M.2 2280)
1 TB, PCIe, TLC, 2280 M16560-001
512 GB, PCIe, value, 2280 L89745-001
256 GB, PCIe, value, 2280 L85354-001
Secondary solid-state drives (M.2 2230)
256 GB, PCIe, value, 2230 M11042-001
128 GB, PCIe, value, 2230 M11040-001
Solid-state drive support kit N00354-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 40).
2. Remove the bottom cover (see Bottom cover on page 40).
3. Disconnect the battery cable from the system board (see Battery on page 50).
Remove the solid-state drive:
1. The primary solid-state drive is installed in the main solid-state drive connector. Remove the Phillips
M2.0 × 2.5 screw (1) that secures the drive to the computer.
2. Pull the drive away from the socket to remove it (2).
NOTE: Some models do no include a bracket under the drive.
Primary M.2 2280 solid-state drive
Secondary M.2 2230 solid-state drives are installed in the
48
Chapter 5Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
