Optical drive
Description Spare part number
Blu-ray Disc R/RW with SuperMulti Drive 907607-001
DVD+/-RW Double-Layer SuperMulti Drive 907609-001
DVD-ROM Drive 907608-001
Optical drive bracket
NOTE: The optical drive bracket is included in the Plastics Kit.
906001-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Place the computer in “Battery Safe mode” (Battery Safe mode on page 30).
3. Disconnect all external devices connected to the computer.
4. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5. Remove the service door (see Service door on page 31).
Remove the optical drive:
1. Remove the Phillips PM2.5×3.0 screw (1) that secures the optical drive to the computer.
2. Insert a tool into the release slot and push the optical drive to disengage it (2).
3. Remove the optical drive from the computer (3).
32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
