8.
If it is necessary to replace the display hinge covers:
a. Remove the two Phillips PM2.5×3.0 screws (1) that secure the display hinge covers to the
display hinges.
b. Slide the display hinge covers (2) toward each other to remove them from the display hinges.
The display hinge covers are available using spare part number 642783-001.
9. If it is necessary to replace the display hinges:
a.
Remove the four Phillips PM2.5×3.0 screws (1) that secure the display hinges to the
display enclosure.
Component replacement procedures
123
To Next Page
Loading...
