Component Description
(4) USB SuperSpeed powered port Connects and supplies power to a USB device, such as a cell phone, camera,
activity tracker, optical drive, or smartwatch, and provides high-speed data
transfer.
(5) Audio-out (headphone)/Audio-in
(microphone) combo jack
Connects optional powered stereo speakers, headphones, earbuds, a headset,
or a television audio cable. Also connects an optional headset microphone. This
jack does not support optional standalone microphones.
WARNING! To reduce the risk of personal injury, adjust the volume before
putting on headphones, earbuds, or a headset. For additional safety
information, refer to the Regulatory, Safety, and Environmental Notices.
To access this guide:
▲ Select the Start button, select HP Help and Support, and then select HP
Documentation.
‒ or –
▲ Select the Start button, select HP, and then select HP Documentation.
NOTE: When a device is connected to the jack, the computer speakers are
disabled.
(6) MicroSD memory card reader Reads optional memory cards that store, manage, share, or access information.
To insert a card:
1. Hold the card label-side up, with the connectors facing the computer.
2. Insert the card into the memory card reader, and then press in on the card
until it is rmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the memory card reader.
(7) Drive light ● Blinking white: The hard drive is being accessed.
● Amber: HP 3D DriveGuard has temporarily parked the hard drive.
8 Chapter 2 Components
To Next Page
Loading...
