1-6
Introducing the Switch
Switch Features
Switch Features
The features of the switches include:
■ 8, 16, or 24 auto-sensing 10/100/1000Base-T RJ-45 ports with Auto-MDIX.
■ 1410-24G Switch includes two dual-personality uplink ports (1000Base-T
RJ-45 or mini-GBIC).
■ Plug-and-play networking—all ports are enabled—just connect the
network cables to active network devices and your switched network is
operational.
■ Auto-MDIX on all twisted-pair ports, meaning that all twisted-pair
connections can be made using straight-through cables. Cross-over cables
are not required, although they will also work.
■ Automatically negotiated full-duplex operation for the 10/100/1000 RJ-45
ports when connected to other auto-negotiating devices.
■ Automatic learning of the hardware addresses in each switch’s 8000-
address forwarding table (4000-addresses for the 1410-8G Switch).
■ Support for up to 9216-byte Jumbo frame size to improve performance of
large data transfers.
■ Support for IEEE 802.1p prioritization Quality of Service (QoS) to deliver
data to devices based on the priority and type of traffic.
■ Fanless designed enables quiet operation for deployment in open spaces.
To Next Page
Loading...
