HP PROCURVE 2520

10-7
Planning and Implementation for the 5400zl/8200zl Switches
Planning Your PoE Configuration
Planning and
Implementation for the
5400zl/8200zl Switches
Power Configuration for HP ProCurve 5412zl/8212zl
PoE/PoE+ Switches
Table 10-8 shows the maximum PoE/PoE+ power available for various power
configurations.
Note Using PoE power supplies J8712A and J8713A with the J9306A in PoE/PoE+
switches is NOT supported. Use the J9306A zl power supply for switches
providing both PoE and PoE+ power.
(With External Power
Supplies Added>
5 0 N+1 Up to 1092 W 1365 W
6 0 Full Up to 819 W 1638 W
0 5 N+1 Up to 3600 W 4500 W
0 6 Full Up to 2700 W 5400 W
Switch Model 5412zl/
8212zl
Number of Power Supplies Redundancy Model Non-Redundant
Power Available
J8712A
(110 or 220 volts)
J8713A
(220 volts only)
N + 1
or
Full
Redundant PoE Power Non-Redundant
PoE Power