HP ProCurve 2610-48-PWR User Manual

1-27
Introduction
Quick Reference Table
Introduction
2650-PWR
10/100 48
24 @ 15.4 watts
48 @ 15.4 watts
2
2
J8168A
J8169A
406 watts
available to ports
1-24, provided by
the internal
source. 408/204
4
watts available to
ports 25-48,
provided by the
EPS source.
2610-24/12-PWR 10/100 8 @ 15.4 watts
12 @ 10.5 watts
4 J8168A
J8169A
126 watts
available to ports
1-12, provided by
the internal
source. 408/204
4
watts available,
provided by the
EPS source.
2610-24-PWR 10/100 24
24 @ 15.4 watts
4 J8168A
J8169A
406 watts
available to ports
1-24, provided by
the internal
source. 408/204
4
watts available,
provided by the
EPS source.
2610-48-PWR 10/100 48
48 @ 15.4 watts
4 J8168A
J8169A
406 watts
available to ports
1-24, provided by
the internal
source. 408/204
4
watts available to
ports 25-48,
provided by the
EPS source.
2910al-24G-PoE
10/100/1000
24
24 @ 30 watts
5
4
2
J9146A
382 watts available
to ports 1-24,
provided by the
internal source. 770
watts available,
provided by the EPS
source.
Model/
Device
Port Type Port Count/
PoE watts per
port
1
Gig Uplink
Ports
RPS/EPS Maximum Power
Internal and
External
Power
Fault
Locator
Console
Spd mode: off = 10 Mbps
2 flash = 100 Mbps
on = 1 Gbps
3 flash = 10 Gbps
*
LED
Mode
Clear
Reset
PoE+ Integrated 10/100/1000Base-T Ports (1 - 24T)  Ports are Auto-MDIX
Test
Tmp
Status
Dual-Personality Ports: 10/100/1000-T (T) or SFP (S)
!
Use only one (T or S) for each Port
PoE
Fan
21S
23S
22S 24S
FDx
Spd
PoE
Act
*
14
16
19
17
15
13
18
20
Link
Mode
23T
21T
22T
24T
Link
Mode
Status of the Back
Mdl RPS
EPS
ProCurve Switch
2910bl-24G-PoE
J9146A
Link
Mode
Link Mode
12
10
8
6
4
2
119
7
5
31
Link
Mode
Link
Mode
Usr
Auxiliary Port
PoE+

HP ProCurve 2610-48-PWR Specifications

General

Brand	HP
Model	ProCurve 2610-48-PWR
Category	Switch
Language	English