HP ProCurve 2610-48-PWR User Manual

1-28
Introduction
Quick Reference Table
Introduction
2910al-48G-PoE 10/100/1000 48
24 @ 30 watts
5
48 @ 15 watts
4
2
J9148A 382 watts available
to ports 1-48,
provided by the
internal source. 770
watts available,
provided by the EPS
source.
3500-24-PoE
10/100
24
24 @ 15.4 watts 4
2
J8696A
398 watts available
to ports 1-24,
provided by the
internal source. 388
watts available as
backup in case of
failure, provided by
the external source.
3500-48-PoE 10/100 48
48 @ 15.4 watts
4
2
J8696A 786 watts available
to ports 1-48,
provided by both the
internal and external
sources.
3500yl-24G-PWR
10/100/1000
24
24 @ 15.4 watts 4
2
J8696A
398 watts available
to ports 1-24,
provided by the
internal source. 388
watts available as
backup in case of
failure, provided by
the external source.
3500yl-48G-PWR 10/100/1000 48
24 @ 15.4 watts
48 @ 7.5 watts
4
2
J8696A 786 watts available
to ports 1-48,
provided by both the
internal and external
sources.
Model/
Device
Port Type Port Count/
PoE watts per
port
1
Gig Uplink
Ports
RPS/EPS Maximum Power
Internal and
External
Power
Fault
Locator
Console
LED
Mode
Clear
Reset
PoE+ Integrated 10/100/1000Base-T Ports (1 - 48T)  Ports are Auto-MDIX
Test
Tmp
Status
Dual-Personality Ports: 10/100/1000-T (T) or SFP (S)
!
Use only one (T or S) for each Port
PoE
Fan
45S
47S
46S 48S
*
Spd mode: off=10 Mbps, 2 flash=100 Mbps, on=1 Gbps, 3 flash=10 Gbps
FDx
Spd
PoE
Act
*
38
40
43
41
39
37
12
10
8
6
4
2
11
9
7
5
3
1
42
44
Link
Mode
Link
Mode
Link
Mode
47T
45T
46T 48T
Link
Mode
Status of the Back
Mdl
RPS
EPS
ProCurve Switch
2910bl-48G-PoE
J9148A
Link Mode
Link
Mode
24
22
20
18
16
14
23
21
19
17
15
13
Link
Mode
Link
Mode
36
34
32
30
28
26
3533
31
29
27
25
Link
Mode
Link
Mode
Usr
PoE+

HP ProCurve 2610-48-PWR Specifications

General

Brand	HP
Model	ProCurve 2610-48-PWR
Category	Switch
Language	English