HP ProCurve 5412ZL Planning And Implementation Guide

1-9
Introduction
PoE Capabilities of the Products
Introduction
HP ProCurve 2610 Switches
These switches support some pre-standard PoE devices. For a list of these
devices, see the FAQs for your switch model. This feature must be enabled; it
is not a default feature.
The 2610-48-PWR (J9089A), has 48 Integrated PoE auto-sensing
10/100Base-TX RJ-45 ports with four Gigabit Uplink ports.
The 2610-24-PWR (J9087A), has 24 Integrated PoE auto-sensing 10/100Base-
TX RJ-45 ports with four Gigabit Uplink ports.
The 2610-24/12PWR (J9086A), has 12 Integrated PoE auto-sensing 10/100Base-
TX RJ-45 ports with four Gigabit Uplink ports.
For more information, refer to the Management and Configuration Guide on
the ProCurve Web site. To display the list of downloadable manuals, click on
the following link: www.hp.com/go/procurve/manuals.
(You may want to bookmark this Web page for easy access in the future.)

HP ProCurve 5412ZL Specifications

General

Input Voltage	100-240 VAC
Jumbo Frame Support	Yes
Layer	Layer 3
Port Type	10/100/1000Base-T, SFP
Management	CLI, Web, SNMP