5-61
Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
Figure 5-27. The Completed VID-DSCP Priority Configuration
The switch will now apply the DSCP policies in figure 5-27 to packets received
on the switch with the specified VLAN-IDs. This means the switch will:
â– Overwrite the original DSCPs in the selected packets with the new DSCPs
specified in the above policies.
â– Assign the 802.1p priorities in the above policies to the appropriate
packets.
HP Switch(config)# vlan 1 qos dscp 000010
HP Switch(config)# vlan 20 qos dscp 000010
HP Switch(config)# vlan 30 qos dscp 000101
HP Switch(config)# vlan 40 qos dscp 000111
HP Switch(config)# show qos vlan-priority
VLAN priorities
VLAN ID Apply rule | DSCP Priority
------- ----------- + ------ -----------
1 DSCP | 000010 1
20 DSCP | 000010 1
30 DSCP | 000101 5
40 DSCP | 000111 7
To Next Page
Loading...
Need help?
General