Virus Throttling
Basic Connection-Rate Filtering Configuration
To view the complete connection-rate configuration, including any ACLs
(page 3-20), use show config (for the startup-config file) or show running (for
the running-config file). For example:
Example of a connection-rate
filtering ACL appearing in a
VLAN configuration.
Example of a connection-rate
filtering ACL appearing in the
configuration.
Example of per-port connection-rate
filtering policies appearing in the
configuration.
Entry showing that
connection-rate-filtering is
enabled and set to “medium”
sensitivity.
Figure 3-5. Example of Connection-Rate Filtering Configuration in the Startup-
Config File
3-17
To Next Page
Loading...
