HP ProCurve 8212 - Page 6

HP ProCurve Switch 8212zl
6
Notes Power supplies must be ordered separately. Two J8712A or J8713A supplies
are required to power the J8715A base system.
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950; IEC 60825
Emissions
FCC Class A; FCC part 15 Class A; ICE-003, Canadian Radio Interface
Regulation; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN EN 55024, CISPR 24
ESD
IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated IEC 61000-4-3; 3 V/m
EFT/Burst
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
Surge IEC 61000-4-5; 1 kV/2 kV AC
Conducted IEC 61000-4-6; 3 V
Power frequency magnetic field
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Voltage dips and interruptions IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Management
HP ProCurve Manager Plus; HP ProCurve Manager (included); command-line
interface; Web browser; configuration menu; out-of-band management (serial
RS-232C)
Notes
Interface/Service modules, power supplies, and redundant management module
ordered separately
RS-232C console port via an RJ-45 connector
When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product number ends with the letter "B" or later, e.g., J4858B, J4859C) are
required.
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UF807E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF808E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(UF809E)
3-year, 24x7 SW phone support, software updates (UF810E)
Installation with minimum configuration, system-based pricing (U4828E)
Installation with HP-provided configuration, system-based pricing (U4832E)
Refer to the HP Web site at www.procurve.com/services for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.