HP ProLiant DL160 Generation 6 (G6)

Power
ProLiant DL160 G6 Fully Configured 115V/60Hz 220V/50Hz
Fully Loaded System Input Wattage (W) 448 445
Fully Loaded System Input Current (A rms) 3.833 2.046
Fully Loaded System Thermal (BTU- Hr) 1529 1518
Fully Loaded System VA (Volt-Amp) 449 454
System Inrush Current with all power supplies loaded (A) 10.1 10.96
Power cord requirements Nema 5-15P to IEC320-C13 IEC320-C13 to IEC320-C14
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2) PCI
cards.
Power Cord AF556A
Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow
connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to
PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user
wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord must be
ordered separately.
If customers require a power cord, they can check the power cord matrix for the appropriate cord. Please
see the following power cord matrix: http://www.hp.com/go/powercordmatrix .
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
System Specifications
DA - 13247 North America — Version 59 — September 24, 2012 Page 52