HP ProLiant DL160 Generation 6

Memory Registered DIMMs (RDIMMs)
HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21
HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21
HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B21
HP 8GB 2Rx4 PC3-10600R-9 Kit 500662-B21
HP 8GB 2Rx4 PC3-8500R-7 Kit 516423-B21
HP 16GB 4Rx4 PC3-8500R-7 Kit 500666-B21
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB 1Rx8 PC3-10600E-9 Kit 500668-B21
HP 2GB 2Rx8 PC3-10600E-9 Kit 500670-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator .
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant-energy-
efficient
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
Hard Drive NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
and the server backplane) should operate at the same data transfer rate or the system
bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SATA Non-Hot Plug 3.5" Midline (MDL) Drive
NOTE: A minimum of one SATA Non-Hot Plug hard drive is required ONLY when
purchasing Non-Hot Plug CTO Chassis Model (P/N 491531-B21) in Step 1.
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD 462595-B21
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD 458939-B21
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD 458947-B21
QuickSpecs
HP ProLiant DL160 Generation 6
Configuration Information - Factory Integrated Models
DA - 13247 Worldwide QuickSpecs — Version 11 — 11.16.2009 Page 17