Removal and replacement procedures 42
To replace the component, reverse the removal procedure.
PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server
and remove all AC power cords before removing or installing the PCI riser board assembly.
To remove the component:
1. Power down the server (on page 25).
2. Remove the server from the rack (on page 26).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the air baffle ("Air baffle" on page 28).
5. Disconnect internal or external cables connected to expansion boards.
6. Remove the PCI riser board assembly.
To replace the component, reverse the removal procedure.
Expansion board
To remove the component:
To remove the component:
1. Power down the server (on page 25).
2. Remove the server from the rack (on page 26).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the air baffle ("Air baffle" on page 28).
5. Remove the PCI riser board assembly ("PCI riser board assembly" on page 42).
To Next Page
Loading...
