Need help?Do you have a question about the HP ProLiant DL385 G6 and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Management | HP Integrated Lights-Out 2 (iLO 2) |
| Processor | Up to two Six-Core AMD Opteron 2400 Series |
| Memory | Up to 128 GB DDR2 Registered or Unbuffered DIMMs |
| Storage | Up to 8 SFF SAS/SATA drives |
| Power Supply | Two (2) 750W hot-plug, redundant power supplies (depending on configuration) |
| Chipset | AMD SR5690 |
| RAID Controller | HP Smart Array P410i with 256MB Cache (RAID 0/1/1+0/5/5+0) |
| Network Controller | HP NC382i Dual Port Multifunction Gigabit Server Adapter |
| Expansion Slots | 6 PCIe Gen2 slots |
Details warranty service where only replacement parts are provided free of charge.
Identifies and lists external and internal mechanical parts of the server.
Lists various functional components within the server system.
Lists the necessary tools for performing service procedures.
Essential safety information and precautions to follow before servicing.
Guidelines to prevent damage from static electricity to sensitive components.
Critical warnings and cautions related to server installation and operation.
Steps required to prepare the server for maintenance or component replacement.
Specific guidance for connecting SAS hard drives.
Instructions for connecting the battery pack for the BBWC.
Lists guides and resources for resolving server issues.
Information on HP SIM for remote server management.
Tool for performing system diagnostics and validating repairs.
Identifies components and connectors on the server's front panel.
Explains the function of front panel LEDs and buttons.
Interprets system and internal health LED status for diagnosing issues.
Identifies components and connectors on the server's rear panel.
Explains the function of rear panel LEDs and buttons.
Explains the meaning of combined SAS/SATA drive LED states.
Describes the status indicators on the battery pack.
Operating temperature, humidity, and altitude ratings.
Physical dimensions, weight, and input power requirements.
Detailed specifications for the server's power supply units.
Technical details for SAS and SATA hard drives.
To Next Page