Need help?Do you have a question about the HP ProLiant DL385 and is the answer not in the manual?
General| Product Line | ProLiant |
|---|---|
| CPU Type | AMD Opteron |
| Maximum Processors | 2 |
| Chipset | AMD 8000 series |
| RAID Support | Yes |
| Form Factor | 2U |
| Memory Type | DDR2 |
| Memory Slots | 16 |
| RAID Levels | 0, 1, 5 |
| Network | Embedded Gigabit Ethernet |
| Power Supply Type | Hot-plug redundant |
| Operating System Support | VMware |
| Storage Controller Type | SAS |
| Expansion Slots | 6 PCI-X slots |
Details the various components located on the server's system board.
Provides instructions for powering the server on and off safely.
Specifies the necessary space and airflow requirements for the server.
Specifies the required temperature ranges and power considerations.
Step-by-step instructions for mounting the server in a rack.
Detailed steps for installing a processor into the server.
Instructions and guidelines for installing server memory (DIMMs).
Procedure for installing and removing hot-plug SCSI hard drives.
Procedure for installing and removing hot-plug SAS hard drives.
Guidelines for connecting SAS hard drives in the server.
Details on configuring embedded simplex SCSI connections.
Introduction to the various configuration tools available for server setup.
Information on using SmartStart for server deployment and configuration.
Guide to configuring server settings using the RBSU utility.
Essential safety precautions to follow before troubleshooting.
Lists important warnings and cautions related to server operation and maintenance.
To Next Page
