HP ProLiant DL385 - Removing a Hot-Plug SAS Hard Drive

70 HP ProLiant DL385 Server User Guide
3. Install the hard drive.
4. Determine the status of the hard drive from the hot-plug SAS hard drive LED
combinations (on page 26
).
Removing a hot-plug SAS hard drive
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
1. Determine the status of the hard drive from the hot-plug SAS hard drive LED
combinations (on page 26
).
2. Back up all server data on the hard drive.