Server operations 41
a. Lift the PCI riser cage thumbscrews (1).
b. Turn the thumbscrews counter-clockwise to loosen them (2).
c. Lift the PCI riser cage from the server (3).
CAUTION: If a RILOE board is installed in the riser cage, the
cable to the system board must be removed after the riser cage is
partially lifted from the server.
Installing the PCI riser cage
CAUTION: To prevent damage to the server or expansion
boards, power down the server and remove all AC power cords before
removing or installing the PCI riser cage.
To Next Page
Loading...
