68 HP ProLiant DL385 Server User Guide
Power supply blank
Loosen the thumbscrew that secures the redundant power supply blank, and then
pull the blank from the back of the server.
Hot-plug SAS hard drive options
When adding hard drives to the server, observe the following general guidelines:
• The system automatically sets all drive numbers.
• If only one hard drive is used, install it in the bay with the lowest drive
number.
• Hard drives must be SFF types.
• Drives should be the same capacity to provide the greatest storage space
efficiency when drives are grouped together into the same drive array.
SAS drive numbers
To Next Page
Loading...
