Removal and replacement procedures 36
4.
Remove the fan blank.
To replace the component, reverse the removal procedure.
BBWC battery pack
CAUTION: To prevent a server malfunction or damage to the equipment, do not add or
remove the battery pack while an array capacity expansion, RAID level migration, or stripe
size migration is in progress.
To remove the component:
1. Power down the server (on page 24).
2. Extend the server from the rack (on page 25).
3. Remove the access panel ("Access panel" on page 27).
4. Remove the BBWC battery.
To Next Page
Loading...
