Removal and replacement procedures 44
7.
Remove the HP Systems Insight Display and LED assembly.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server (on page 25).
2. Extend the server from the rack (on page 26).
3. Remove the access panel ("Access panel" on page 28).
4. If installed, remove the BBWC battery pack or the FBWC capacitor pack ("BBWC battery pack or
FBWC capacitor pack" on page 37).
5. Remove the air baffle ("Air baffle" on page 38).
6. Remove the DIMM.
To Next Page
Loading...
