Connectors, Switches, and Status Indicators
Compaq ProLiant DL360 Server Maintenance and Service Guide 5-11
COMPAQ CONFIDENTIAL Codename: MicroMachines Part Number: 169616-006 Last Saved On: 1/7/02 10:57 AM
Hot-Plug SCSI Hard Drive Status LED Indicators
Each hot-plug SCSI hard drive has three LED indicators located on the front of the drive, as
shown in the following figure. Use the following figure and table to analyze the status of each
hot-plug SCSI hard drive.
21 3
Figure 5-8: Hot-plug SCSI hard drive LED indicators
• The LED on the left indicates Drive Activity
, where On indicates activity and Off
indicates no activity by the drive.
• The center LED indicates Online Status
, where Flashing indicates an active online
condition and Off indicates an inactive online condition.
• The LED on the right indicates Fault Status
, where Flashing indicates fault-process
activity and Off indicates a no fault-process activity.
Table 5-7: Hot-Plug SCSI Hard Drive LED Status Combinations
Activity
Online
Fault
Means
On Off Off
Do not remove the drive. Removing
a drive during this process will
cause data loss.
The drive is being accessed and is
not configured as part of an array.
On Flashing Off
Do not remove the drive. Removing
a drive during this process will
cause data loss.
The drive is rebuilding or undergoing
capacity expansion.
continued
To Next Page
Loading...
