Removal and Replacement Procedures
2-4 Compaq ProLiant DL360 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: MicroMachine Part Number: 169616-006 Last Saved On: 12/31/01 11:05 AM
Preparation Procedures
Before beginning to remove any serviceable parts, determine whether the part is a hot-plug
device or non-hot-plug device.
Hot-Plug Devices
ProLiant DL360 servers support only hot-plug SCSI hard drives.
IMPORTANT: It is not necessary to turn off the server to replace hot-plug hard drives when they not in
active use.
Non-Hot-Plug Devices
If the part is a non-hot-plug device, you must power down the server before servicing the
component. Non-hot-plug parts include the processors, all boards, DIMMs, the fan assembly,
and the CD-ROM/diskette drive assembly.
To Next Page
Loading...
