Removal and Replacement Procedures
2-8 Compaq ProLiant DL360 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: MicroMachine Part Number: 169616-006 Last Saved On: 12/31/01 11:05 AM
ProLiant DL360 Server Drives
This section describes the drive cage positions, and removal and replacement procedures for
parts of the ProLiant DL360 server.
CAUTION: The ProLiant DL360 server does not support IDE or EIDE hard drives.
Drive Locations
1 2 3
Figure 2-3: ProLiant DL360 server drive positions
Table 2-1: Drive Location
Location Drive SCSI ID
Hot-plug drive cage for 1-inch height hot-plug SCSI hard
drive
0
Hot-plug drive cage for 1-inch height hot-plug SCSI hard
drive
1
CD-ROM (DVD-ROM)/diskette drive assembly
• Low-profile 3.5-inch, 1.44-MB diskette drive
• Low-profile IDE CD-ROM (DVD-ROM) drive
—
To Next Page
Loading...
