NOTE:
The 5U Rack-Mount Kit can support up to 4 full-height tape drives and is compatible with
SDLT 320, Ultrium 230, and Ultrium 460 tape drives.
NOTE:
Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information
regarding these kits:
http://h18000.www1.hp.com/products/quickspecs/10854_div/10854_div.HTML
(Worldwide)
http://h18000.www1.hp.com/products/quickspecs/10854_na/10854_na.HTML
(North America)
HP StorageWorks Tape Array 5300
C7508A
NOTE:
The Tape Array 5300 is a 3U enclosure that supports up to 2 full-height or 4 half-height
hot-swap array modules, including DAT and Ultrium tape drives. Cables and terminators are not
included and must be ordered separately.
NOTE:
Please see the Tape Array 5300 QuickSpecs for additional information regarding this
product.
http://h18000.www1.hp.com/products/quickspecs/11878_div/11878_div.HTML
(Worldwide)
http://h18000.www1.hp.com/products/quickspecs/11878_na/11878_na.HTML
(North America)
Accessories for 3U & 5U Rack-mount Tape Drive Kits
LVD Cable Kit, VHDCI/HD68
NOTE:
For use with the 3U Rack-mount Kit and 5U Rack-mount Kit only.
168048-B21
LVD Cable Kit, HD68/HD68
NOTE:
For use with the 3U Rack-mount Kit and 5U Rack-mount Kit only.
242381-B21
Accessories for 3U & 5U Rack-mount Tape Drive Kits
PSU/Fan Upgrade Kit - Redundant hot-swap power supply unit and fan for Tape Array 5300.
68-pin HD multi-mode terminator
C2364A
1.0m 68-pin VHDCI to 68-pin HD cable
C2361B
2.5m 68-pin VHDCI to 68-pin HD cable
C2362B
5.0m 68-pin VHDCI to 68-pin HD cable
C2365A
10.0m 68-pin VHDCI to 68-pin HD cable
C2363B
0.5m 68-pin HDI to 68-pin HD cable LVD/SE
C2978B
1.5m 68-pin HDI to 68-pin HD cable LVD/SE
C2979B
0.9m 68-pin HDI to 68-pin HD cable LVD/SE
C2911C
2.5m 68-pin HDI to 68-pin HD cable LVD/SE
C2924C
NOTE:
For use with Tape Array 5300 only.
QuickSpecs
HP ProLiant DL380 Generation 3 (G3)
Options
DA - 11473 Worldwide — Version 45 — December 13, 2004
Page 17
To Next Page
Loading...
