HP ProLiant DL380 G3 - Page 36

Integrated Smart Array 5i
Plus Controller
Data Compatible with all
Smart Array Controllers
Yes
Instant Upgrades to other
Smart Array Controllers
Yes
Consistent Software
Manageability Tools
Yes
PCI-X Bus 64-bit, 100 MHz (integrated on system board)
PCI-X Peak Data
Transfer Rate
800 MB/s
SCSI Protocols Supported Ultra3, Ultra2
SCSI Peak Data
Transfer Rate
160 MB/s per channel
NOTE: For ProLiant servers having TWO internal drive bays on separate SCSI ports:
SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2.
Channels 2
NOTE: For ProLiant servers having two internal drive bays on separate SCSI ports:
SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2.
SCSI Ports
(external/internal)
0/2
NOTE: For ProLiant servers having two internal drive bays on separate SCSI ports:
SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2.
Drives Supported
(maximum)
Maximum = total number of drives
NOTE: Maximum is the total number of internal drives on each specific ProLiant
server.
Cache 64 MB Read and/or Write Cache
Battery-Backed Write
Cache
Yes, with installation of Battery-Backed Write Cache Enabler, up to 64MB
RAID Support 0, 1, 1+0, 5
Logical Drives
(maximum)
Maximum = total number of drives
Online Configuration Yes
Online Capacity Expansion Yes
Logical Drive Capacity
Extension
Yes
Online Stripe Size
Migration
Yes
Online RAID Level
Migration
Yes
Online Spare Support Yes
Automatic Data Recovery Yes
Drive Roaming Yes
Redundant Controllers No
QuickSpecs
HP ProLiant DL380 Generation 3 (G3)
Technical Specifications
DA - 11473 Worldwide — Version 45 — December 13, 2004 Page 36