EasyManua.ls Logo

HP ProLiant DL380 Generation 3 - Environmental Specifications; DDR SDRAM DIMM Specifications

HP ProLiant DL380 Generation 3
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
106 HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide
Environmental Specifications
Temperature range
Operating
10°C to 35°C (50°F to 95°F)
Shipping
-40°C to 70°C (-40°F to 158°F)
Maximum wet bulb
temperature
28°C (82.4°F)
NOTE: All temperature ratings shown are for sea level. An altitude
derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft)
is applicable. No direct sunlight allowed.
Relative humidity (noncondensing)
Operating 10% to 90%
Non-operating 5% to 95%
NOTE: Storage maximum humidity of 95% is based on a
maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.
Hot-Plug Power Supply Calculations
For hot-plug power supply specifications and calculators to determine electrical
and heat loading for the server, refer to the HP Enterprise Configurator website
(http://h30099.www3.hp.com/configurator/
).
DDR SDRAM DIMM Specifications
Item Description
Size 256 MB, 512 MB, 1 GB, 2 GB
Width 72 bits
Upgrade requirement Any combination of like-paired DDR SDRAM DIMMs that
provide a minimum of 512 MB
Note: Use only 256-, 512-MB, 1-GB, or 2-GB, 72-bit wide, 2.5-V, PC2100
Registered ECC DDR SDRAM. Use Compaq branded or HP DDR SDRAM only.
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM

Related product manuals