98 HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide
Power LED
(Green)
Fault LED
(Amber)
OK to
open?
Slot Status
On On No The power to the slot is on, but the slot needs attention for a
possible problem with the slot, board, or driver. DO NOT open
the slot release lever.
Examine the logs and Insight Manager 7. If the expansion
board is faulty, remove or replace the board.
Flashing On or off No The power to the slot is being turned off or on, which may take
several seconds. DO NOT open the slot release lever.
To cancel the operation, press the PCI Hot Plug button.
Off On Yes The power to the slot is off, but the slot needs attention for a
possible problem with the slot, board, or driver.
Off Off Yes The power to the slot is off.
PCI Riser Cage LED
CAUTION: To prevent damage to the server or expansion
boards, power down the server and remove all AC power cords before
removing or installing the PCI riser cage.
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM
To Next Page
Loading...
