HP 750W Common Slot 277VAC Hot Plug Power Supply Kit
717364-B21
HP 1200W Common Slot 277VAC Hot Plug Power Supply Kit
NOTE:
The 1200W Common Slot 277VAC Hot Plug Power Supply Kit does not include a
power cord.
717359-B21
HP Common Slot Titanium Power Supply Kits
NOTE:
96% efficiency with support for HP Power Discovery Services.
HP 750W Common Slot Titanium Hot Plug Power Supply Kit
697581-B21
NOTE:
Option Kits for AC power supplies include the power supply and one PDU IEC
cable.
NOTE:
HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
NOTE:
Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
Step 3: Choose Additional Factory Integratable Options (only one of the following from each
list unless otherwise noted)
HP Graphic Options
NVIDIA GRID K1 PCIe GPU FIO Adapter
NOTE:
The HP DL380p Gen8 Dbl Wide GPU Cage Kit (728543-B21) supports 1xK1 in the
secondary position.
NOTE:
This option is available as a CTO only option.
730876-B21
HP Rack Kits
NOTE:
Gen8 rail kits have changed significantly from prior generation rail kits. Please
take a moment to review the installation documentation that comes with the server to
help you with the installation of your Gen8 server.
NOTE:
Rail kits are optional for DL380p Gen8 and are no longer included standard with
the server. Customers have the option to purchase their server without a rail kit. The HP
2U Gen8 Cable Management Arm is not available when using Friction Rails.
NOTE:
To assist in the installation of the server into the rack, an optional installation
tool is available by contacting your local services representative (p/n 695539-001).
Caution:
HP recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation.
NOTE:
See HP Rack Options in Additional Options section of this QuickSpecs for more
rack kit choices.
HP 2U FIO Friction Rail Kit
NOTE:
Kit contains non-telescoping friction rails which do not allow for in-rack
serviceability. The HP Gen8 Cable Management Arm is not available when using Friction
Rails.
663476-B21
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
C6N36A
HP OneView
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
E5Y43A
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
E5Y43AAE
QuickSpecs
HP ProLiant DL380p Generation8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14212 North America — Version 54 — December 20, 2013
Page 46
To Next Page
Loading...
Need help?
General
