3.
moRe ve the fan.
CAUTION: Do not operate the server for long periods with the acc
Operating the server in this manner results in improper
lead to thermal damage.
ess panel open or removed.
airflow and improper cooling that can
To replace the component, reverse the removal procedure.
Hard drive backplane
To remove the component:
1. Power down the server (on page 26).
2. Extend or remove the server from the rack ("Extend the server from th
the server from the rack
" on page 27).
3. Remove the access panel ("Access panel" on page 30).
4. Remove all hot-plug hard drives ("Hot-plug SAS hard drive" on page
5. Disconnect the SAS cable from the hard drive backplane.
e rack" on page 25, "Remove
31).
Removal and replacement procedures 37
To Next Page
Loading...
