EasyManua.ls Logo

HP ProLiant DL385 Generation 5p - Hot-plug power supply calculations; CD-ROM drive specifications

HP ProLiant DL385 Generation 5p
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BTUs per hour 2285 at 100V to 120V AC
input
2217 at 200V to 240V AC
input
Power supply output
Rated steady-state power 800 W at 100V AC input
900 W at 120V AC input
1200 W at 200V to 240V AC
input
Maximum peak power 800 W at 100V AC input
900 W at 120V AC input
1200 W at 200V to 240V AC
input
System input requirements information is based on measurements with hardware available at the time of publishing
this document. For updated information, visit the
HP website (http://www.hp.com/servers/powercalculator).
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the
HP Enterprise Configurator website (http://h30099.www3.hp.com/configurator/).
CD-ROM drive specifications
Specification Value
Disk formats CD-ROM (modes 1 and 2); mixed mode (audio and data combined); CD-DA;
Photo CD (single/multiple-session), CD-XA ready; CDi ready
Capacity 550 MB (mode 1, 12 cm)
640 MB (mode 2, 12 cm)
Block size 2368, 2352 bytes (mode 0)
2352, 2340, 2336, 2048 bytes (mode 1)
2352, 2340, 2336, 2048 bytes (mode 2)
Dimensions
Height 12.7 mm (0.50 in)
Depth 132.08 mm (5.20 in)
Width 132.08 mm (5.20 in)
Weight 0.34 kg (0.75 lb)
Data transfer rate
Sustained 150 KB/s (sustained 1X), 1500/3600 KB/s (10X to 24X)
Burst 16.6 MB/s
Access times (typical)
Full stroke 300 ms
Random 140 ms
Specifications 83

Related product manuals