HP ProLiant DL385 Generation 7 (G7) - Memory Installation Examples

Memory modules
Per channel
QR SR or DR Memory module
native speed
Memory bus speed
(standard-voltage
memory module)
Memory bus speed
(low-voltage
memory module)
1 - 1 SR 1600 MHz
2
DR 1600 MHz
2
1600 MHz NA
1 - 1
1
SR 1333 MHz
DR 1333 MHz
1333 MHz 1066 MHz
1 1 - QR 1066 MHz 1066 MHz 1066 MHz
2 - 2
1
SR 1600 MHz
2
DR 1600 MHz
2
SR 1333 MHz
DR 1333 MHz
1333 MHz 1066 MHz
2 1 1 SR 1333 MHz
DR 1333 MHz
QR 1066 MHz
800 MHz 800 MHz
3 - 3 SR SR 1600 MHz
2
SR 1333 MHz
1066 MHz 1066 MHz
3 - 3 DR DR 1600 MHz
2
DR 1333 MHz
1066 MHz 800 MHz
3 - 3 mixed SR 1600 MHz
2
DR 1600 MHz
2
SR 1333 MHz
DR 1333 MHz
1066 MHz 800 MHz
3 1 2 SR 1333 MHz
DR 1333 MHz
QR 1066 MHz
800 MHz 667 MHz
1
These are the only configurations supported by UDIMMs. All configurations listed in this table are supported by RDIMMs.
2
1600 MHz memory is only supported in conjunction with Opteron 6200 series processors.
This table is for reference only.
NOTE: The memory bus speed is set to 800 MHz regardless of the quantity of memory modules installed unless the table above reflects
a slower memory bus speed.
NOTE: There may be more than one memory bus speed menu option.
NOTE: LVDIMM support is dependent on the ROM version.
Memory Installation Examples
These memory installation examples show the memory sockets associated with the first processor only. If there is a second processor
installed, like for a performance model, then these examples can be applied toward the memory sockets associated with the second
processor also.
2 RDIMMs per processor
Standard memory: 2x2GB RDIMMs (4GB per processor)
Optional memory: Adding 10x8GB RDIMMs to standard memory (84GB per processor)
Maximum memory: Replacing standard memory with 4x32GB QR RDIMMs and 8x16GB DR RDIMMs (maximum of 256GB per
processor)
QuickSpecs
HP ProLiant DL385 Generation 7 (G7)
Memory
DA - 13594 North America — Version 48 — March 25, 2013 Page 44