HP ProLiant DL580 G2 - Page 42

The drives are configured by default into three logical disks at the controller
level as described in Table 8.
Table 8 100 series two-HDD configurati ons
ML110 G2 (Express)
Logical
disk
RAID level
Size/allocation
Purpose
1
RAID 1
9GBacrossphysicaldrives
0, 1
Primary OS
2
RAID 1
9GBacrossphysicaldrives
1, 0
Secondary
OS
3
RAID 1
Remaining space across all
physical drives
Data
DL100G2(Workgroup,2drives)
1
Logical
disk
RAID level
Size/allocation
Purpose
1
RAID 1
12 GB across physical drives
0, 1
Primary OS
2
RAID 1
12 GB across physical drives
0,1
Secondary
OS
3
RAID 1
Remaining space across all
physical drives
Data
1
TheDL100G2(Workgroup)alsoisavailableinafour-driveconfiguration. See the
section called “Four-HDD configurations” for configuration information.
WhentheprimaryOShasafailuresuchassystemfiles becoming
corrupted, registry corrupted, or the system hangs during boot, the
system should be run from the secondary OS. To run the system from the
secondary OS:
1. Power down the unit.
2. Connect a monitor, keyboard, and mouse directly to the rear of the
unit.
3. Power on the unit.
4. During boot up, select to use the secondary partition.
42
Default storage configurations