EasyManua.ls Logo

HP ProLiant MicroServer - Page 47

HP ProLiant MicroServer
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
Memory
The system has two DIMM slots that support up to 8 GB maximum system memory (4 GB in each of
the two DIMM slots).
Memory Configuration
Memory installation guidelines
Observe the following important guidelines when installing memory modules:
Use only HP supported unbuffered ECC DDRIII DIMM in 1 GB, 2 GB or 4GB capacities (Up to
800 MHz).
All DIMMs installed must be of the same speed.
DIMMs can be damaged by improper handling. Always use an anti-static wrist strap and
grounding mat, and discharge static electricity before touching DIMMs.