HP ProLiant ML110 Generation 3

47
5 Physical and operating specifications
This chapter provides physical and operating specifications for the HP ProLiant ML110 Generation 3 server.
Specifications include:
• System unit
• Memory
• Processor
• IDE CD-ROM drive
• SCSI hard drive
• SATA hard drive
• SCSI storage controller
System unit
Table -1 Hardware specifications
Item Component
Processor socket Intel LGA775
Processor support Intel Celeron D
Intel Pentium 4
Intel Pentium D
Core logic chipset Intel E7230
Intel 6702V
Super I/O chipset SMSC SCH5307
Hardware monitoring device SMSC EMC1023
Gigabit Ethernet controller Broadcom BMC5721
Memory controller Integrated in the Intel E7230
SATA and IDE controllers Integrated in the Intel 6702V
VGA controller ATI ES1000/RN50 with 16 MB of video memory
I/O subsystem • One PCI-E x4 slot
• One PCI-E x8 link with x16 slot
• Two 3.3V 32-bit/33-MHz PCI bus slot
Memory Four DDR II DIMM slots
Storage Bay • Two half-height storage bays for CD-ROM drive, tape drive, non-hot-plug hard drive
• Two 3.5-in bay for non-hot-plug SCSI or SATA HDD
I/O ports PS/2 keyboard port, PS/2 mouse port, USB 2.0 ports (two front-mounted ports, two
rear-mounted ports, and two internal connectors on the system board), video port, two serial
ports, parallel port, and LAN port.
Status LED indicators
Front panel
Rear panel
System board
• IDE CD-ROM drive activity
• Power/system health status
• Hard drive activity
• LAN activity
• LAN link status
• Auxiliary power indicators
• Processor IERR indicator
Power supply unit (PSU) Delta SSI DPS (350 watts)
Thermal solution • One system fan
• One processor heatsink fan
• One PSU fan