HP ProLiant ML110 User Guide

Hardware options installation 19
IMPORTANT: If upgrading processor speed, update the system ROM before installing the
processor.
To install a processor:
1. Power down the server (on page 6).
2. Remove the access panel ("Access panel" on page 6).
3. Remove the heatsink fan and the heatsink. For more information, see the server installation sheet.
CAUTION: Failure to completely open the processor locking lever prevents the processor from
seating during installation, leading to hardware damage.
4. Open the processor locking lever.
5. Install the processor.
6. Close the processor locking lever.

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)