Troubleshooting 66
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty power supply
• Loose or faulty power cord
• Power source problem
• Power on circuit problem
• Improperly seated component or interlock problem
• Faulty internal component
Item See
1 Server maintenance and service guide, located on the Easy Set-up CD,
the support CD, or the HP website
(http://www.hp.com/products/servers/platforms
)
2 "General diagnosis flowchart (on page 64)"
3 "Loose connections (on page 59)"
4 "Power source problems (on page 73)"
5
• "Power supply problems (on page 73)"
• Server maintenance and service guide, located on the Easy Set-up
CD, the support CD, or the HP website
(http://www.hp.com/products/servers/platforms
)
6 "System open circuits and short circuits (on page 84)"
To Next Page
Loading...
