HP ProLiant ML110 Operating System Installation Guide

2
Installing Microsoft Windows Server 2003 and Windows
Small Business Server 2003
Windows 2003 Pre-installation Instructions
NOTE: For ease of reading, both “Microsoft Windows Server 2003” and “Microsoft Windows Small
Business Server 2003” will be referred to as “Windows 2003” in this chapter; the HP ProLiant ML110
Server Startup CD-ROM will be simply referred to as the Startup CD.
1. Complete the pre-NOS installation procedures listed in Chapter 1.
2. Have the following installation requirements on hand:
•
•
•
•
•
HP ProLiant ML110 Server Startup CD-ROM
Microsoft Windows 2003 CD-ROM
Six blank, formatted 3.5-inch diskettes
A Windows PC that has a:
— Floppy drive
— CD-ROM drive
— Browser that supports HTML
Two or more clients for testing purpose (optional)
Windows 2003 Installation Flow
1. Create the driver diskettes using the Startup CD.
2. Install Microsoft Windows 2003.
3. Complete the installation—install the drivers for the Intel and LAN chipsets.
4. Configure the system.
5. Configure the network.
6. Install additional HP accessories.
HP ProLiant ML110 Server Network Operating System Installation Guide 2-1

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)