Installing Red Hat Linux 9.0
HP ProLiant ML110 Server Network Operating System Installation Guide 6-5
Customize Graphics Configuration
Review the Graphics Configuration settings and modify them as necessary, then click Next to
finalize the installation.
After completing the installation, click Exit to close the installation program. The system
reboots and loads your new Red Hat environment.
Section 2. Installing Additional HP Accessories
The HP ProLiant ML110 Server Startup CD-ROM includes the drivers for accessories
compatible to your server.
Refer to the product manual enclosed with the accessory for the detailed installation
procedure and/or to the attached readme.txt file associated with the driver. The readme.txt file
can be found on the appropriate driver diskette.
On-line Information and Software Sources
• HP World Wide Web access: www.hp.com
• Red Hat World Wide Web access: www.redhat.com
To Next Page
Loading...
